'ZDNET Recommends': What exactly does it mean?
ZDNET's recommendations are based on many hours of testing, research, and comparison shopping. We gather data from the best available sources, including vendor and retailer listings as well as other relevant and independent reviews sites. And we pore over customer reviews to find out what matters to real people who already own and use the products and services we’re assessing. Car Charger Socket Female
![How to fix broken wires the easy way - with heat-shrink butt connectors | ZDNET](http://cdn.globalso.com/boshunelectronics/94-Pin-Male-Automotive-ECU-Connector-3.jpg)
When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions. This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay. Neither ZDNET nor the author are compensated for these independent reviews. Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.
ZDNET's editorial team writes on behalf of you, our reader. Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services. Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards. If we have made an error or published misleading information, we will correct or clarify the article. If you see inaccuracies in our content, please report the mistake via this form.
A heat-shrink butt connector -- perfect for joining wires together!
My how-to post on soldering yielded some feedback from readers asking for my opinion of heat-shrink butt connectors .
Yeah, I know. I've been using these for years and the name still makes me chuckle. Sadly, my kit calls them "solder sleeve connectors" but they're the same thing.
Also: This tiny USB-C tester can spot counterfeit Apple chargers
So, what are heat-shrink butt connectors? When should (and shouldn't) you use them? And how do you use them properly?
Solderless, crimpless, butt connectors. All you need is just a heat gun to create a solid, weatherproof joint.
Heat-shrink butt connectors (yeah, I'm still giggling) are sleeves of heat-shrink tubing with a ring of solder in the middle and two rings of adhesive at each end.
You apply heat, and the solder melts to join the wires together and the glue softens to create a weatherproof seal.
Also: How to solder: Tools, tips, and tricks to get you started the easy way
So, when should you use a heat-shrink butt connector?
Here's when not to use a heat-shrink butt connector:
As for voltages, I've seen these connectors rated to 600 volts. However, I would never use them for anything more than 12/24V automotive or marine applications.
Also: This is the perfect mini electric screwdriver
For AC power, I'd use a Wago connector (these are rated to 32A/450V), but I always recommend getting professional advice when dealing with power lines.
Strip 1/4 inch of insulation from the ends of the wires that you want to connect. If possible, twist the exposed wire strands together to create a tight connection. (This might not be possible with some wire.)
These connectors come in a variety of sizes. Follow the guidance on the packaging as to which size to use (and put the lid back on the box when you've chosen one so you're not playing pick-up off the floor with the rest of the butt connectors).
Slide the connector over one of the wires, making sure the wire is inserted all the way into the connector. Repeat this step with the other wire.
Position the connector so the exposed wire ends are touching each other.
Use a heat gun or a lighter to heat the entire connector until the solder inside melts and flows around the wire strands. Make sure to apply heat evenly to all sides of the connector to ensure a good connection.
Once the solder has flowed around the wires, allow the connector to cool completely before handling it. The solder will harden as it cools, creating a secure and permanent connection.
Check the connection to ensure that the wires are securely connected and that the tubing is tightly sealed around the connection.
Wires aligned and ready for the heat to shrink the connector.
Personally, I'm not a fan of using naked flames to shrink the butt connector, because, well, things can burst into flames.
I find using a hot air gun from a rework station to be safer and less dramatic.
Shrinking a butt connector with a hot air gun.
I like to finish with a bit of adhesive-lined heat-shrink over the entire repair, giving it extra stability and weatherproofing.
Also: This has replaced my multitool for a fraction of the cost
Remember, if you're going to do this you need to fit the heat-shrink onto the wire you're joining before joining them together with the butt connector.
I like to finish with a bit of heat-shrink over the entire repair.
![How to fix broken wires the easy way - with heat-shrink butt connectors | ZDNET](http://cdn.globalso.com/boshunelectronics/23-Pin-6.jpg)
Ecu Electronic Control Unit That's a repair to be proud of!