In the fields of metallurgy and materials science, experts are always aiming towards better products with enhanced physical and chemical properties. This is usually done by performing specialized processes under specified conditions. Cold-working and hot-working different types of steel products are useful in augmenting their properties.
Image Credit: Nordroden/Shutterstock.com Mounting Plate
The process of cold working involves the strengthening of steel material by physically manipulating the material below the recrystallization temperature. The recrystallization temperature is defined as the temperature at which new defect-free crystalline grains replace the original ones present in the material.
The cold working process does not involve significant recovery. Instead, it results in the accumulation of internal and residual stresses within the metal. Additionally, there is a potential for cracks or pores in the metal to propagate, and new cracks may form during this cold working process. Notably, the strengthening in this process occurs without the utilization of heat.
There are four common and famous types of cold working processes, including squeezing, bending, shearing, and drawing. Squeezing includes several methods, such as rolling, extrusion, and cold forging.
Cold-rolled steel is put under severe stress. Strain hardening occurs during this process, which can increase the hardness by about 20 percent compared to its original state. Another common process is cold forging, which involves placing the steel or targeted metal between two dies, followed by pounding the dies. This leads to the targeted metal acquiring the shape of the die.
Bending methods are preferred for the shaping of steel alloys. Shearing involves splitting the steel sheets into different strips.
Steel slitting is a procedure designed to cut a broad master coil into narrower strands with consistent measurements. Manufacturers feed the large stainless steel through a machine known as a slitter, and then the resulting strands are recoiled into a finished coil. It's worth noting that the machine's knives can leave a burr on the slit edge.
Cold-worked steel components are frequently employed in industries such as aerospace and automobile industry. Several essential processes and equipment for medical applications incorporate cold-worked steel, such as pacemaker stamping and hypodermic needles. Cold-work steel is used to manufacture rivets, gaskets, and shielding.
In addition to increasing the strength of metal, cold rolling also contributes to smoother surfaces. Cold-rolled steel can be as high as ten times smoother than hot-rolled steel in terms of roughness height, which measures surface irregularities. This attribute positions cold working as a preferred method for producing the smooth metal surfaces commonly found in consumer goods.
Cold working is economically efficient as it does not generate scrap metal, which is often a byproduct of other processes. Unlike hot working, cold working does not require soaking pits and furnaces, further contributing to its cost-effectiveness.
Hot working involves processes in which metals are plastically deformed at temperatures above their recrystallization temperature. Operating above the recrystallization temperature enables the material to undergo recrystallization during deformation. This is crucial as recrystallization prevents strain hardening, thereby maintaining low yield strength and hardness while preserving high ductility.
Steel is commonly hot worked at temperatures around 1300°F (700°C), involving the shaping of metal close to its molten state. In any hot working process, the critical factor is the temperature control of the workpiece, as approximately 90% of the energy applied to the workpiece transforms into heat.
Hot rolling is a conventional working process utilized for various purposes. In this process, steel undergoes passage through a pair of rollers moving in opposite directions but with the same speed. This action flattens, lengthens, and reduces the cross-sectional area of the steel, resulting in uniform thickness.
Hot forging holds significant commercial importance, finding widespread use in various industries for the production of diverse products. It entails shaping metal through localized compressive forces, involving heating, deforming, and shaping the metal piece. These forces are applied through a manual hammer or hammer machine and die. Hot forging is particularly valuable in the manufacturing of industrial components such as crane hooks, cranks, crankshafts, and wrenches.
Hot working is well-suited for bulk production tasks. The material's elevated temperature provides increased ductility, allowing for unrestricted hot-working of the metal. The higher temperature reduces shear stress, requiring significantly less force for the necessary deformation. Moreover, hot working effectively eliminates various imperfections caused by gas pores and composition differences in the material.
The structural integrity and redundancy in the design of steel buildings may prevent their collapse in the event of a fire hazard. Consequently, the residual mechanical properties of steel materials become crucial indicators for assessing the post-fire performance of the overall structure and the potential reuse of steel members.
In an article published in Construction and Building Materials, researchers compared the residual mechanical properties of hot and cold worked steel at high temperatures such as fire conditions.
In both hot-rolled and cold-formed steels, the elastic modulus remains largely unchanged following exposure to fire. When air-cooled, hot-rolled steels exhibit reductions in yield strength and ultimate strength after heating beyond 600°C. Conversely, cold-formed steels show early strength reduction, commencing from heating to 300°C.
Hot-rolled steels demonstrate improved ductility under air cooling conditions, while ductility reduction is observed when water-cooled from elevated temperatures. In contrast, the post-fire ductility values of cold-formed steels consistently exhibit improvements.
Both hot-working and cold-working for steel have their distinct advantages. These methods are employed for various industrial processes. However, the choice of any particular process depends on the intended application and the desired properties.
Glass-Ceramic Materials for Dental and Orthopedic Implants
American Galvanizers Association, (2023). Cold Worked Steels. [Online] Available at: https://galvanizeit.org/design-and-fabrication/design-considerations/cold-worked-steels
Garcia, A., (2023). Hot Working and Cold Working; Its Advantages, Disadvantages. [Online] Available at: https://mechathon.com/hot-working-and-cold-working/
Kumar, A., (2021). Hot Working: Definition, Methods, Working Process, Advantages, Disadvantages, Application. [Online] Available at: https://themechanicalengineering.com/hot-working/
Madhu, (2019). Difference Between Hot Working and Cold Working. [Online] Available at: https://www.differencebetween.com/difference-between-hot-working-and-vs-cold-working/
Metallurgy For Dummies, (2023). Metal Hot Working Process. [Online] Available at: https://www.metallurgyfordummies.com/metal-hot-working-process.html#:~:text=Steel%20is%20typically%20hot%20worked,workpiece%20is%20converted%20into%20heat.
Yu et. al. (2019). Mechanical properties of hot-rolled and cold-formed steels after exposure to elevated temperature: A review. Construction and Building Materials. 213. 360-376. Available at: https://doi.org/10.1016/j.conbuildmat.2019.04.062
PMPA, (2023). 5 Benefits of Cold Work in Steels. [Online] Available at: https://www.pmpa.org/5-benefits-of-cold-work-in-steels/
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Ibtisam graduated from the Institute of Space Technology, Islamabad with a B.S. in Aerospace Engineering. During his academic career, he has worked on several research projects and has successfully managed several co-curricular events such as the International World Space Week and the International Conference on Aerospace Engineering. Having won an English prose competition during his undergraduate degree, Ibtisam has always been keenly interested in research, writing, and editing. Soon after his graduation, he joined AzoNetwork as a freelancer to sharpen his skills. Ibtisam loves to travel, especially visiting the countryside. He has always been a sports fan and loves to watch tennis, soccer, and cricket. Born in Pakistan, Ibtisam one day hopes to travel all over the world.
Please use one of the following formats to cite this article in your essay, paper or report:
Abbasi, Ibtisam. (2023, December 19). Cold Work vs Hot Work in Steel: Understanding the Differences. AZoM. Retrieved on January 31, 2024 from https://www.azom.com/article.aspx?ArticleID=23260.
Abbasi, Ibtisam. "Cold Work vs Hot Work in Steel: Understanding the Differences". AZoM. 31 January 2024. <https://www.azom.com/article.aspx?ArticleID=23260>.
Abbasi, Ibtisam. "Cold Work vs Hot Work in Steel: Understanding the Differences". AZoM. https://www.azom.com/article.aspx?ArticleID=23260. (accessed January 31, 2024).
Abbasi, Ibtisam. 2023. Cold Work vs Hot Work in Steel: Understanding the Differences. AZoM, viewed 31 January 2024, https://www.azom.com/article.aspx?ArticleID=23260.
Do you have a review, update or anything you would like to add to this article?
In this interview, AZoMaterials speaks with Knauer about project management capabilities in OEM, customization abilities, as well as what makes Knauer OEM solutions unique.
Andrea Steck, Martius Cobo, Bruno Chencarek
In this interview, join Bruker as they describe how to improve battery production and performance, through the entire value chain, with the help of NMR.
In this interview, Sara Speak, the Industrial and Environmental Product Application Specialist at Veolia Water Technologies & Solutions, talks to AZoMaterials about the current challenges the food and beverage industry (F7b) faces in water management.
The Wafer XRD 300 is a integratable wafer Ooientation solution
This product profile describes the features and applications of the FOX 200 HT for measuring thermal conductivity.
This product profile describes the features and applications of the PlasmaPro ASP by Oxford Instruments Plasma Technology.
The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show
The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.
In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.
AZoM.com - An AZoNetwork Site
Cold Rolled Steel Stamping Owned and operated by AZoNetwork, © 2000-2024